Medizinische Produkte und Systeme

MACtac® Medical Products - medizinische Produkte und Systeme - werden in vielfältigen Anwendungsbereichen, zu denen beispielsweise Einwegelektroden, Operationsabdecktücher, Wundverbände und transdermale Wirkstoffverabreichungssysteme gehören, eingesetzt. Die Herstellungsstätten entsprechen natürlich aktuellen ISO-Standards und Anforderungen nach cGMP (Good Manufacturing Practices). Das gewährleistet eine hohe Produktqualität sowie maximalen Nutzerkomfort für den Patienten.

Hauptanwendungen 

 Klebstoffe für Elektroden/Pads sowie Infusionspflaster

 Fertigung von Medizinprodukten

 Klebstoffe für Operationsabdecktücher

 Wundversorgung und transdermale Wirkstoffverabreichungssysteme

Mehr über MACtac Medical Products

Referenz	Bezeichnung	Kleber	Abdeckpapiere	Stärke	Dicke des Klebers	Technische Daten
TM-1015	deep matte clear polyethylene film coated on one side with 25.5µ of acrylic medical grade adhesive, protected by 80 gr PEK release liner.	acrylic	PEK release liner	38 µ	63.5 µ
TM-1030	deep matte clear polyethylene film coated on one side with 25.5 µ of acrylic medical grade adhesive protected by 80 gr PEK release liner.	acrylic	PEK release liner	76 µ	100 µ
TM 5300	76 µ translucent matte polyurethane film coated on one side with a skin friendly	Acrylic	80 gr white calendered release liner.	76 µ	101.6
TM-5151	translucent matte polyurethane film coated on one side with a skin friendly breathable acrylic based adhesive protected by a 80 gr poly-coated release liner.	breatheable acrylic	poly-coated release liner	25.4 µ	50 µ
TM 8710	PET coated on two sides with a latex free, synthetic elastomer adhesive. The adhesive is protected by an 80 gr SCK release liner	synthetic elastomer adhesive	80 gr SCK with a silicone release coating on two sides.	12.7 µ	104 µ
TM 6563	Double-sided foam coated on two sides with acrylic based, hypoallergenic pressure sensitive adhesive. TM-6563 was designed for assembling medical devices where skin contact is possible. It exhibits good adhesion to polyethylene	SBMA	semi bleached kraft release liner	0.8 mm	63.5µ
TM 6570	Single-sided film coated with acrylic based, hypoallergenic pressure sensitive adhesive. Designed for mounting electro-medical devices to the human skin. Applications : electrocardiograph pads, grounding pads, etc ..	SBMA	densified, semi-bleached kraft release liner	90µ	63.5µ
TM 9409	Single-sided foam tape with acrylic based, hypoallergenic pressure sensitive adhesive.formulated for sustained contact with the human skin. Designed as a general purpose tape used for EKG pads, grounding pads,IV holders	SBMA	polycoated white kraft release liner.	3.2 mm	63.5µ
TM 9478	Single-sided non woven tape coated with acrylic based, hypoallergenic pressure sensitive adhesive. Designed for use as a breathable medical tape : TENS and stress electrodes plus protective pads and covers	SBMA	densified, semi-bleached kraft release liner	68.5 gr/m²	355 µ – 455 µ
TM 9479	ingle-sided non woven tape coated on one side with acrylic based, hypoallergenic pressure sensitive adhesive. Designed for use as a breathable medical tape : TENS and stress electrodes plus protective pads and covers	SBMA	densified, semi-bleached kraft release liner	68.5 gr/m²	355-455 µ
TM 9710	Double-sided film with acrylic based, hypoallergenic pressure sensitive adhesive. designed for assembling medical devices where skin contact is possible. The adhesive is very aggressive and bonds well to polyethylene	SBA	densified, semi bleached kraft release liner.	12.7µ	35.6µ
TM 9616	Double-sided foam tape coated on two sides with acrylic based, hypoallergenic pressure sensitive adhesive.designed for assembling medical devices where skin contact is possible. It exhibits good adhesion to polyethylene	SBMA	densified, semi-bleached kraft release liner	1.6 mm	63.5µ
TM 9716	Single-sided tape made of a crosslinked polyethylene foam coated on one side with acrylic based, hypoallergenic pressure sensitive adhesive. Low tack pediatric tape used for EKG pads, Transdermal delivery	SBMA	polycoated white kraft release liner	1.6 mm	35.6µ
TM 9720	Double-sided film with acrylic based, hypoallergenic pressure sensitive adhesive. Designed for assembling medical devices where skin contact is possible. The adhesive is very aggressive and bonds well to polyethylene.	SBA	densified, semi bleached kraft release liner.	12.7 µ	50.8 µ
TM 9942 NK	Single-sided foam tape with acrylic based, hypoallergenic pressure sensitive adhesive.formulated for sustained contact with the human skin. Designed as a general purpose tape used for EKG pads, grounding pads,IV holders	SBMA	polycoated white kraft release liner	0.8 mm	63.5 µ
TM 9946	Single-sided foam tape with acrylic based, hypoallergenic pressure sensitive adhesive. formulated for sustained contact with the human skin. Designed as a general purpose tape used for EKG pads, grounding pads, IV holders.	SBMA	polycoated white kraft release liner	1.6 mm	63.5µ
TM 9947	Cross linked polyethylene foam coated on one side with acrylic based, hypoallergenic pressure sensitive adhesive. The adhesive is protected by a 80 gr white calendered release liner	SBA	white calendered release liner.	1 mm	50 µ
TM 9976-60	Cross linked 1.6 mm polyethylene foam coated on one side with an acrylic based, hypoallergenic pressure sensitive adhesive. The adhesive is protected by a 80 gr semi-bleached SCK paper release liner.	SBMA	80 gr semi-bleached SCK paper release liner	1.6 mm	1643 µ
TM 9979	Cross linked polyethylene foam coated on one side with 597acrylic based, hypoallergenic pressure sensitive adhesive. The adhesive is protected by a 80 gr white calendered release liner	SBMA	80 gr white calendered release liner.	1.5 mm	1550 µ